OtsoPro

Reactive power

 OtsoPro corrects the power factor to the desired value (factory setting 0.99), removing both inductive and capacitive reactive power as needed. Any reactive power charges are reset to zero.



- Reactive power correction 50-800 kVar

Unbalanced Load

The device has an additional function that effectively corrects the unbalanced load on the network side:

- Harmonics caused by unbalanced loads are reduced

- The current in the neutral conductor caused by the unbalanced load is almost completely eliminated

Remote monitoring

OtsoPro measures and records the most significant electrical parameters, which can be viewed visually on the OtsoSmart monitoring portal immediately after the device is put into operation.

Installation

/maintenance

OtsoPro is installed in parallel with the main control panel and does not require a power outage.

The device is almost maintenance-free. The filter of the device must be cleaned 1-2 times a year (every 6 months in a dusty center). This procedure can be performed by a certified electrical professional.

Size options

- 50 kVar 600x400x1115

- 100 kVar 415x875x1960 (CAB model)

- Modular equipment cabinet (RACK model) 100-800 kVar 820x820x2150

Harmonic correction

OtsoPro filters low-frequency harmonics 3-13 harmonics (e.g. motor drives).